DBX iEQ-31
 See Larger Image |
Uncompromised dbx sonic integrity enhanced with a powerful array of flexible features define the dbx iEQ-31 Graphic EQ. You get AFS one-touch feedback suppression, Type V noise reduction, and PeakStopPlus limiting. Switchable ±6 or ±15dB boost/cut range; ±12dB input gain range; 40mm faders; and nonconductive nylon sliders give you precision command. 10Hz to 22kHz frequency response, 110dB dynamic range, 1/3-octave Constant Q frequency bands, and internal toroidal transformer. 1/4" TRS, XLR, and Euroblock balanced and unbalanced RF-filtered inputs and outputs.
dbx iEQ-31 Graphic EQ Specifications:
- Inputs
- Impedance: balanced 40kohms, unbalanced 20kohms
- Max input level: >=22dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
- Outputs
- Impedance: Balanced >120ohms, unbalanced >60ohms
- Max output level: >+20dBu balanced/unbalanced into 2kohms or greater
Bandwidth: 20Hz to 20kHz, ±-0.5dB - Signal-to-noise ratio: >94dB, unweighted, ref +4dBu, 22kHz measurement bandwidth
- Dynamic range: >110dB, unweighted, >113dB A weighted
- THD+Noise: <0.005%, 0.02% typical at +dBu, 1kHz
- Interchannel crosstalk: <-80dB, 20Hz to 20kHz
- Operating voltage: 100VAC 50/60Hz, 120VAC 60Hz; 230VAC 50/60Hz
- Power consumption: 14W
- Mains connection: IEC receptacle
- 19"W x 3-1/2"H x 7.9"D
dbx iEQ-31 Graphic EQ Features:
- Dual 15-band EQ
- AFS one-touch feedback suppression
- Type V noise reduction
- PeakStopPlus limiting
- Switchable ±6 or ±15dB boost/cut range
- ±12dB input gain range
- 40mm faders
- Nonconductive nylon sliders
- 10Hz to 22kHz frequency response
- 110dB dynamic range
- 1/3-octave Constant Q frequency bands
- Internal toroidal transformer
- 1/4" TRS, XLR, and Euroblock balanced and unbalanced RF-filtered inputs and outputs
We carry the full line of DBX. If you need a piece that is not listed on our website, check here: http://www.dbxpro.com/products.php and call for a price.