B-52 ACT Pro 12M (B52 ACTPRO 12 M)
NEW - BETTER SPEAKER, LOWER PRICE. IT'S A NO-BRAINER!
B-52 ACT-PRO 12
12" 2 Way Powered Speaker / Stage Monitor
500 Watt RMS Bi-Amped
(1000 Watt Program Power / 2000 Watt IP Power)
Contains: B-52 SP-1200 and COMP-4CLB
Configuration 12" 2-Way multipurpose powered loudspeaker -500W
Transducers:
Low Frequency SP-1200 - 12" speaker with 2.5" voice coil
High Frequency COMP-4-CLB - PETP film compression driver with 1.75" voice coil
LF Magnet Weight 42 oz
LF Magnet Structure Weight 7 lbs.
Frequency Range 50 Hz - 20 kHz
Frequency Response 58 Hz -18 kHz
High Frequency Dispersion 75บ conical
Maximum peak SPL 129 dB
Output Power LF: 400W Class G
HF: 100W Class AB+B
Input Impedance 20 kOhm Balanced
10 kOhm Unbalanced
Elctronic Crossover 4th order
Low Cut Filer (switchable) 3rd order Butterworth @ 100 Hz
Controls Level knob
Low-cut filter switch
Ground lift switch
Power switch
AC fuse
115/230V switch
Indicators Power
Protect
Limit
Signal
Cooling Convection
Amplifier Protection Short circuit
Clip-limiter
Overheat mute
SOA output stage
Driver DC protection
Subsonic filter
Turn-on mute and soft ramp
Turn-on inrush current limiting
Power Consumption @ 115V Vac
(1/8 power pink noise) 150VA
Connectors Balanced female XLR input
Balanced male XLR link output
Input Sensitivity ** 775mV (0dBu)
Enclosure Black Warnexฎ painted birch plywood
Hardware Metal handles
Rubber feet / Rubber strips
Pole mounting cup
Grille Powder coated 16 gauge steel
Dimensions 26.5" H x 16.5" W x 16" D
(673mm x 419mm x 406mm)
Weight 56 lbs. / 25.5 kg
CLASS G AMPIFIER FEATURES
Bi-amp design with discrete output stage for both the woofer and compression
driver
4th order electronic X-over and multi-stage custom equalization
Proprietary efficient class-G amplification on LF channel
Subsonic filter: 12dB/octave
Built-in compressor/limiter
Balanced XLR input (Left and Right on ACTPRO118S Sub)
Balanced XLR full-range output (Left and Right on ACTPRO18S Sub)
Left and Right balanced XLR high-pass outputs on ACTPRO18S Sub
0-1800 Phase switch on ACTPRO18S Sub
100Hz 18dB/octave low cut switch on Full Range models
Ground lift switch
Full thermal & short circuit protection
Large heatsink with convection cooling
Oversized toroidal transformer
LEDs for Power, Protect, Limit and Signal
115V/230V 60Hz/50Hz selector switch
PETP-FILM DIAPHRAGM COMPRESSION DRIVER
Sophisticated computer modeling was used to optimize the magnetic and acoustic
design of these ferrite magnet compression drivers to achieve outstanding
performance and reliability.
A matched wave front phase corrector produces a perfectly coherent sound wave
at the horn throat, for a detailed and dynamic mid and high frequency
performance.
The polyimide-insulated, copper-clad aluminum voice coil is edge-wound on a
glass fiber former resulting in a lower distortion and superior power to weight
ratio.
A one-piece, PETP film diaphragm and surround optimizes energy transfer for
greater efficiency
The unique patented clamping system contributes directly to a low distortion
performance while improving the lower mid-band response.
COMPONENTS
Compression Driver:
o Celestion 1-exit with PETP film diaphragm
Horns:
o 900 x 400 constant directivity horn (ACTPRO15 & ACTPRO1515)
o Conical wave guide (ACTPRO12M)
LF Transducers :
o Vented magnet assemblies for advanced cooling
o High temperature copper voice coil wound on polyamide former for increased
reliability
o Celestion SP-1200 (ACTPRO12M)
o Celestion SP-1500 (ACTPRO15 & ACTPRO1515)
o Proprietary SP-1804 cast frame subwoofer (ACTPRO18S)
CABINET FEATURES
Made in U.S.A. using advanced CNC routers
5/8 birch plywood construction (ACTPRO12M, ACTPRO15, ACTPRO1515)
3/4 birch plywood construction (ACTPRO18S)
Main & monitor sitting positions (ACTPRO12M)
Reinforced internal bracings
Environmentally friendly Warnecketm scratch resistant black paint finish
16 gauge wrap around steel grilles
Metal handles and rubber feet
Rubber strips (ACTPRO12M)
Metal pole mounting cup (ACTPRO1515 excluded)
Front logo illuminated with blue LED