RCF Art 310-A |
ART 310-A is the reference speaker in the 10" size. Incredible amplifier power, high quality neodymium transducers, very compact size cabinet. From live sound, playback and monitoring to corporate events and presentations, ART 310-A is the ideal speaker in all the situations where the output of a PA and the size of a studio monitor is required. Superb deep bass punch, very linear and precise frequency response.
RCF ART 310-A is an active, wide dispersion 2 way sound reinforcement speaker. It integrates a high power 350 watt amplifier, a complete electronic processor section and RCF low distortion, high power neodymium transducers. The system is unique in its class for output and vocal intelligibility. The new 10" neodymium woofer is the result of the latest refinement in year of RCF experience in compact 2 way speakers. Features a 2,5 " voice coil, very high efficiency and controlled bass reproduction.
The compression driver uses a new 1.5" Mylar dome design and optimised geometry radial phase plug. This innovative design is powered from a high flux neodymium magnet offering a very open and natural midrange sound with extreme precision in high frequency reproduction. A generous 2 step class H design is used to power the low frequencies and the compression driver amplifier is a warm and clear class AB design.
Incredibly lightweight, ART 310-A uses high efficiency TAED amplifier and neodymium woofer and compression driver for the maximum output in the minimum weight ever seen in the 10" active speaker.
The input section presents a XLR input connector that is switchable from microphone to line levels. A master volume control and a useful XLR loop through link guarantee the best versatility. The processor section includes active crossover, system equalisation, transducers phase alignment, limiter and protection functions. The system is visually monitored from 4 status LEDs.
All the system is housed in a strong , very lightweight, polypropylene composite enclosure . The woofer is protected from a strong, powder coated, metal grille. The cabinet features 2 M10 threaded fly points, a 35 mm stand adaptor plus an ergonomic top handle for easy transportation.
- 350 watt Monolithic bi-amplification, 300 watt low frequency and 50 watt high frequency power.
- 127 dB max SPL.
- Wide dispersion, 90 x 70 low distortion, constant directivity horn.
- 10" high power woofer, 64mm in/out aluminium coil.
- 1" neodymium, high frequency driver.
- Electronic equalization, phase alignment, limiter and protection.
- Mic/Line XLR input, XLR signal output.
- 1 comfortable top handle for easy transportation and positioning.
- Two M10 fly points and built in pole mount adaptor.
TAED Amplifier Technology Neodymium Magnets
Active 2-way speaker
ACOUSTICAL SPECIFICATIONS
Frequency response 50-20 kHz
Max SPL 127 dB
Sensitivity 1w/1m -
Coverage angle 90x70
Compression driver neo 1"
Midrange -
Woofer neo 10"
Power handling -
INPUT SECTION
Input signal- Impedance bal/unbal
Input connector jack/xlr
Output signal connector xlr
Input sensitivity 0 dBu
Mic. input sensitivity -40 dBu
PROCESSOR SECTION
Crossover frequencies 1800 Hz
Selectable high pass output -
Protections DC/short cir.
Limiter fast limiter
Master volume yes
Phase switch -
Music/Voice eq -
Remote control option -
AMPLIFIER
Nominal power 350 Watt
High frequencies ab/50 Watt
Mid frequencies -
Low frequencies H/300 Watt
Cooling Convection
PHISICAL SPECIFICATIONS
Height 537mm (21,14")
Width 337mm (13,27")
Depth 315mm (12,4")
Weight 12,4 Kg.
Cabinet Composite PP
Hardware 2 M10 flying points
Handles 1 top
Pole Mount / Cap yes
Colour Anthracite grey
Active 2-way speaker
|
Ph.(201) 535-3593
