|
The MATRIX-200 is the newest member of the popular B-52
MATRIX family of active systems. Compact, powerful and portable the MATRIX-200
delivers clean, accurate sound ideal for both stage and music playback
applications. The MATRIX-200 has a true 200-watt stereo amplifier, built in
5-channel mixer, studio-quality digital effects, phantom power and numerous
patch inputs / outputs.
SUGGESTED APPLICATIONS:
Mobile DJ * Karaoke * Nightclub, Restaurant, Bar Install * Corporate Audio /
Video * Home Entertainment System * Live Sound System * Stage Monitoring System
* Booth Monitoring System
BUILT-IN DSP EFFECTS
Eight built-in high quality DSP effects
* Level control to mix processed signal
with main signal
*
INPUT/MASTER switch to route effects
to either Master section or to
individual channels
Powerful routing to combine optional
outboard
effects with internal DSP effects
24-BIT DIGITAL EFFECTS
The MATRIX-200 includes a
24-bit, 8-position digital effects loop, that allows you to incorporate DSP
controlled and digitally generated effects into your mix. Effects offer a wide
range of "environments" to
choose from including:
Chorus
Chorus/reverb
Slapback
Echo
Large room
Small room
Small hall
Large hall
Speaker Outputs: Two full-range outputs of 100 watts each. The outputs
are equalized to optimize the acoustic output of the MATRIX-200 satellite
speakers.
Subwoofer Output: Switchable XLR balanced output allows you to
add a subwoofer to extend the low frequency output. The sub switch must be in
the OFF position if a subwoofer is not used. The switch ON position reduces the
low frequency output of
the full range stereo outputs.
Headphone: A 1/4" TRS phone jack stereo output is included for
monitoring by headphone.
XLR INPUTS WITH PHANTOM POWER
The XLR microphone inputs are
designed for use with
low-impedance |Z| microphones or equipment that has a mic-level balanced output
(direct-out). The balanced mic inputs include a 15 Volt DC phantom power source
allowing the use of condenser microphones. Dynamic microphones can also be used
with these connectors as the 15 Volts DC is too low to disturb their normal
operation.
STEREO POWER AMPLIFIER FEATURES
Output stage with discrete
devices,
not integrated IC amps
Output power of 2 x 100w RMS with high headroom
Comprehensive amplifier and speaker protection
circuitry to guard against short circuits, DC
offsets,
over-heating, turn-on thumps, subsonic and
supersonic frequencies.
Built-in stereo clip limiter
Equalization customized to enhance and optimize
speaker system performance.
Output for stereo headphones on rear panel
Very efficient cooling, utilizing a large heatsink
and two direct flow fans
Power supply with low-noise torodial transformer
and a dual voltage (115/230Vac) selector switch
LOUDSPEAKERS
Dual 6.5" drivers optimized
for Di'Ippolito configuration
(one speaker high, one low)
1" exit phenolic tweeter on exponential horn to match
acoustic response of 6.5" drivers
FIVE CHANNEL MIXER
FEATURES
|
Four channels
with both balanced XLR mic inputs
and unbalanced 1/4" jack line level inputs
*
15Vdc phantom
power on balanced XLR inputs
*
for
condenser microphones
*
PAN, TONE and
EFFECT LEVEL controls on
*
each
channel
One stereo input channel for stereo sources
*
Dual input with
1/4" TRS Jack and 3.5mm Jack
*
to connect
any 2-channel source
*
Dedicated mono 1/4"
Jack INSTRUMENT input
*
with
frequency response contoured for
*
acoustical
instruments
*
PAN/BALANCE, TONE
and EFFECT controls
|
Low distortion, low
noise circuitry
PLAYBACK input/output RCA connectors with
LEVEL control
PATCH section to connect optional external processors,external
effects, and foot switch
3-band MASTER EQ section
XLR subwoofer output and SUB switch on rear
panel to connect a powered subwoofer |
COMPLETE SYSTEM
Dimensions: 20" (W) x 32"
(H) x 15" (D)
Weight (lbs): 80
|
Ph.(201) 535-3593
