|
The MATRIX-1000 V2 is a complete sound reinforcement SOLUTION comprised of
two 10" two-way powered satellites and a dedicated powered 15" subwoofer. The
MATRIX-1000 V2 has a built-in three-channel 700-watt power amplifier, three
distinct volume controls, electronic crossover with equalization and VCA
compressor.
The circuitry is designed and fine-tuned to integrate all components for the
best possible sound. There is no need to tweak or finesse settings on a
crossover or compressor to make your system sound great. Simply roll the system
into place on its heavy duty casters, plug in the AC, connect the two speaker
cables, run two XLR cables to your mixer and you're ready to go!
V2 UPGRADES: THE BEST JUST GOT BETTER
A new high-performance compression driver for a smoother
frequency
response and lower distortion throughout the upper midrange frequencies.
A new elliptical wave guide with more uniform dispersion.
The addition of a voltage controlled amplifier (VCA) on all three amplifier
channels to minimize the effects of amplifier clipping. This lowers the
maximum distortion produced at VERY high drive levels and offers additional
protection for the speaker components.
More durable FREE dust cover.
Improved B-52 handles.
SUGGESTED APPLICATIONS:
Mobile DJ * Karaoke *
Nightclub, Restaurant, Bar Install * Corporate Audio / Video *
Home Entertainment System * Live Sound System * Stage Monitoring
System * Booth Monitoring System * Drum Monitoring
BUILT-IN 3-CHANNEL AMPLIFIER
The 15"
subwoofer enclosure is divided into two separate compartments. The front chamber
serves as the cabinet for the 15" subwoofer. The rear chamber houses all of the
system's electronic circuitry, which includes the amplification for all three
components, power supply and preamps. The 15" subwoofer has a power handling
capability of 400 watts and a nominal impedance of 8 ohms.
10" SATELLITE SPEAKERS
The MATRIX-1000V2 satellites are loaded with a custom designed
10" speaker and 1" titanium diaphragm compression driver. The "horn" is a 90 by
60 elliptical waveguide that can be rotated 90 to optimize the dispersion
pattern to best suit your particular application. These versatile speakers are
pole-mountable and can sit as stage monitors. They also include 3/8" - 16 tpi
flying hardware for small venue permanent installations. The rounded front of
the satellite speaker is a perfect fit for the convex face of the subwoofer,
allowing a mobile entertainer to stack, roll and transport the entire
MATRIX-1000V2 in and out of a venue in record time.
TRANSPORTING THE SYSTEM
To transport
the MATRIX-1000 V2, simply set the subwoofer on its casters and place the
satellite speakers on to the subwoofer's front panel, facing down. Fasten the
satellites with the included locking strap using the handles on either side of
the subwoofer cabinet. Place the included cover over the entire system and
you're ready to move the MATRIX-1000 V2 with ease.
SPECIFICATIONS:
700-WATT 3-CHANNEL AMPLIFIER
|
Subwoofer Power Output
10" Two-way Power Output
Line in:
Parallel out:
Input Impedance:
Speaker Out:
Power Requirement:
|
400 W
150 W
XLR Female
XLR Male
48 k Ohms
Speakon NL4 Style Connector
115V<>50/60Hz<>10A
230V<>50/60Hz<>6A |
15"
SUBWOOFER
|
Speaker:
Nominal Impedance:
Subwoofer Freq. Response:
Sound Pressure Level
(1w/1m):
Max. SPL:
Weight:
Dimensions (Transport):
|
15"
Custom Built B-52 Subwoofer
8 Ohms
40 Hz; 120 Hz +/- 3dB
102 dB (half space)
127 dB @1% THD
120 lbs
28" (H) x 19" (W) x 23" (D) |
10' TWO-WAY
SPEAKERS
|
Speaker Input:
LF/MF Woofer:
HF Driver:
HF Dispersion:
Nominal Impedance:
Active Freq. Response:
Crossover Frequency (passive):
Sound Pressure Level (1w/1m):
Max. SPL:
Weight:
Dimensions (Upright):
|
Speakon style connector
(pin 1+ = +, pin 1- = -)
10" Custom Built B-52 Transducer
1" Titanium Diaphragm
90 x 60
4 Ohms
120 - 19K Hz +/- 3dB
2.5 kHz; 12 dB / Octave
101 dB (half space)
124 dB @10% THD
30 lbs
19" (H) x 12" (W) x 11" (D) |
High-end speaker stands, cables, and carrying bag
available here:
B-52 Smart Kit (full set)
|
Ph.(201) 535-3593
